The CHAUVET DJ GigBAR Flex is a 3-in-1 mobile lighting system that combines two LED derbies, RGB+UV par lights and strobe effects on a single bar. It is designed for DJs who want a simple Pack-n-Go system with wide room coverage, UV capability and flexible mounting options.
GigBAR Flex is one of the simpler current GigBAR models. It does not use moving heads, lasers or ILS, but it remains useful for mobile setups where fast installation, sound-active shows and broad coverage matter more than advanced synchronised programming.
GigBAR Flex key features
- 3-in-1 mobile lighting system.
- Two LED derby effects.
- RGB+UV quad-colour par lights.
- White and UV strobe effects.
- Pass-through mounting hole for stage and speaker stands.
- Four individually adjustable light heads.
- Wireless footswitch included.
- IRC-6 remote included.
- Automated and sound-active programmes.
- DMX and master/slave operation.
- Carry bag included.
Three effects in one compact system
The two derby fixtures create moving multicoloured beams, the par sections provide broader RGB+UV colour washes and the strobe zones add white or UV flashes. The combination is designed to cover a typical mobile-DJ dance floor without needing several separate fixtures.
RGB+UV pars
The par sections use quad-colour RGB+UV LEDs. The UV element adds blacklight-style effects and gives the colour mixing more flexibility than a simple RGB par.
Flexible mounting
A pass-through mounting hole allows GigBAR Flex to work with compatible stage and speaker stands, while the individual light heads can be adjusted to spread coverage around the room rather than pointing every effect in the same direction.
Control options
The system can run built-in automated or sound-active programmes, work through DMX, or be controlled using the supplied wireless footswitch and IRC-6 remote. Multiple units can also be linked in master/slave mode.
GigBAR Flex strengths
- Simple and quick to set up.
- Three useful effect types in one bar.
- Built-in UV.
- Flexible stand mounting.
- Wireless footswitch included.
- Only around 5 kg.
- Good choice for smaller mobile-DJ rigs.
GigBAR Flex limitations
- No moving heads.
- No laser.
- No ILS or built-in D-Fi.
- Older design than the newer GigBAR ILS models.
- Less suited to tightly programmed moving-light shows.
CHAUVET DJ GigBAR Flex full specifications
- DMX channels: 3, 8 or 20.
- DMX connector: 3-pin XLR.
- Par LEDs: 6 × 3.5 W RGB+UV.
- Derby LEDs: 6 × 5 W RGB.
- Strobe LEDs: 4 × 5 W white and UV.
- Strobe rate: 0–18 Hz.
- Par beam angle: 13°.
- Derby coverage angle: 114°.
- Input voltage: 100–240 V AC.
- Power consumption: approximately 46 W at 230 V.
- Dimensions: 949 × 110 × 388 mm.
- Weight: 5 kg.
GigBAR Flex vs GigBAR 3 ILS
The GigBAR 3 ILS is the newer approach, adding ILS, built-in D-Fi and an LED strip. GigBAR Flex remains the simpler choice if you mainly want derbies, pars and strobes with basic DMX, sound-active and footswitch control.
Frequently asked questions
Does GigBAR Flex support DMX?
Yes. It supports 3, 8 or 20-channel DMX modes through 3-pin XLR.
Does it include a footswitch?
Yes. A wireless footswitch is included, along with the IRC-6 remote and a carry bag.
Overall view
GigBAR Flex is not as advanced as CHAUVET DJ’s newer ILS models, but it remains a useful compact lighting package. For DJs who want simple room-filling effects with quick setup and minimal programming, the combination of derbies, RGB+UV pars and strobes still makes practical sense.