The AlphaTheta HDJ-F10-TX package combines the company’s HDJ-F10 professional wireless DJ headphones with the HP-TX01 SonicLink transmitter. The key difference from the standard HDJ-F10 package is simple: the TX version gives you everything needed to add low-latency wireless DJ monitoring to a mixer that does not already have SonicLink built in.
The headphones themselves use the same 40 mm drivers, Bluetooth 5.2, active noise cancelling, Transparency mode and approximately nine-hour SonicLink battery life as the standard model. The bundled transmitter plugs into a mixer monitoring output and creates the dedicated low-latency wireless link.
HDJ-F10-TX key features
- HDJ-F10 professional closed-back headphones.
- HP-TX01 SonicLink transmitter included.
- Approx. 9 ms SonicLink latency.
- Approx. 15 m SonicLink range in unobstructed conditions.
- Approx. 9 hours SonicLink playback.
- Bluetooth 5.2 with ANC and Transparency mode.
- Approx. 30 hours Bluetooth playback with ANC on.
- Wired operation available.
- 40 mm composite-diaphragm drivers.
- MIL-STD-810H shock-test compliance.
What does the HP-TX01 transmitter do?
The HP-TX01 takes the cue-monitor signal from a compatible mixer and converts it into AlphaTheta’s SonicLink wireless format. This allows the DJ to move without a headphone cable while keeping latency low enough for normal cueing and beatmatching.
The transmitter is especially useful with mixers that pre-date built-in SonicLink. If you already own hardware such as the XDJ-AZ or DJM-V5 with SonicLink integrated, the standard HDJ-F10 package may make more sense.
Why SonicLink matters for DJs
Standard Bluetooth latency is normally too high for reliable DJ cueing. SonicLink is specified at around 9 ms, making it dramatically faster than a conventional SBC Bluetooth connection and close enough to a wired workflow for practical mixing.
Sound, isolation and drivers
The HDJ-F10 uses 40 mm dome drivers with a PEEK-PU-PEEK composite diaphragm. AlphaTheta specifies a 5 Hz to 30 kHz frequency response and 105 dB output sound pressure. The housing and ear pads are designed to provide strong isolation in noisy DJ booths.
Bluetooth listening, ANC and Transparency mode
Outside the booth, the headphones can operate as Bluetooth 5.2 headphones with SBC and AAC support. Active Noise Cancelling is useful for preparation and travel, while Transparency mode lets outside sound through when awareness matters.
Battery life and charging
The headphones are rated for approximately nine hours over SonicLink and around 30 hours over Bluetooth with ANC enabled. Headphone charging takes about 2.5 hours. The bundled HP-TX01 transmitter takes approximately four hours to charge.
HDJ-F10-TX strengths
- Complete wireless-DJ package in one box.
- Low-latency monitoring suitable for real cueing.
- Works with mixers that lack built-in SonicLink.
- Can switch between SonicLink, Bluetooth and wired use.
- ANC and Transparency mode add everyday usefulness.
- Spare ear pads and carrying pouch included.
HDJ-F10-TX limitations
- More expensive than buying the headphones alone.
- The transmitter is unnecessary if your mixer already contains SonicLink.
- Headphones are relatively heavy at 356 g.
- Both headphones and transmitter need charging.
- HP-TX01 does not provide wireless connection to the WAVE-EIGHT speaker.
AlphaTheta HDJ-F10-TX full specifications
- Type: closed, dynamic.
- Driver: 40 mm dome type.
- Frequency response: 5 Hz – 30 kHz.
- Impedance: 32 ohms.
- Output sound pressure: 105 dB.
- Headphone weight: 356 g without cable.
- Headphone charge time: approx. 2.5 hours.
- Transmitter charge time: approx. 4 hours.
- SonicLink range: approx. 15 m.
- SonicLink playback: approx. 9 hours.
- Bluetooth: version 5.2.
- Bluetooth range: approx. 10 m.
- Bluetooth codecs: SBC/AAC.
- Bluetooth playback: approx. 30 hours with ANC on.
What’s included?
- HDJ-F10 headphones.
- HP-TX01 transmitter.
- 1.6 m straight cable.
- 6.3 mm screw-type adapter.
- Two 0.5 m USB-C charging cables.
- Pair of spare ear pads.
- Carrying pouch.
- Quick Start Guide and safety documentation.
Frequently asked questions
What’s the difference between HDJ-F10 and HDJ-F10-TX?
The TX package includes the HP-TX01 SonicLink transmitter. The standard HDJ-F10 package does not.
Can the transmitter work with any mixer?
AlphaTheta states it can be used with DJ mixers equipped with a suitable headphone-monitor output, including 1/4-inch or 3.5 mm connections.
Overall view
The HDJ-F10-TX is the package to choose when the goal is to add SonicLink to existing DJ equipment. It costs more than the headphones alone, but removes the need to source the transmitter separately and gives older mixers a route into low-latency wireless cue monitoring.