The AlphaTheta DJC-STS2 is an adjustable DJ booth stand designed for equipment such as the RMX-IGNITE, a laptop or other compact DJ hardware. It supports loads up to 6 kg, offers six height positions and can be angled from horizontal through to a 90-degree front-facing position.
A stand is a simple accessory, but positioning matters in a crowded booth. Raising a laptop or effects unit can free desk space, improve sight lines and keep controls within easier reach without balancing equipment on improvised supports.
DJC-STS2 key features
- Maximum 6 kg load capacity.
- Six height settings from 235 mm to 310 mm.
- Angle adjustment from 0° to 90°.
- 340 × 242 mm top panel.
- Foldable design for transport.
- 3.7 kg stand weight.
- Designed for RMX-IGNITE, laptops and other compatible DJ equipment.
- AlphaTheta-branded booth styling.
Designed for the RMX-IGNITE and wider booth setups
AlphaTheta promotes the stand particularly alongside RMX-IGNITE and CDJ-3000X setups, but its flat top platform is not limited to one product. A suitable laptop or other piece of DJ hardware can be placed on it as long as the equipment fits securely and remains within the 6 kg load limit.
Six height positions
With the top panel flat, the height can be set to 235, 250, 265, 280, 295 or 310 mm. That range lets the stand sit above mixers or players at a comfortable working height and makes it easier to adapt to different booth furniture.
0° to 90° angle adjustment
The platform can be adjusted from horizontal to a 90-degree front-facing position. In practice, the appropriate angle depends on the equipment: laptops generally suit a shallow angle, while an effects controller may be easier to see and operate when tilted more aggressively towards the DJ.
Stability and load capacity
The stand is rated for a maximum load of 6 kg. That is comfortably above the weight of RMX-IGNITE and many laptops, but the limit should not be treated as a target. Equipment should sit fully on the platform, and cables should not pull sideways on the stand.
Portability
When folded, the DJC-STS2 measures 340 × 349.3 × 101.6 mm. It is therefore much flatter for transport than when assembled, although its 3.7 kg weight means it is more substantial than a lightweight folding laptop stand.
That extra weight is part of the stability trade-off. A stand used for live effects needs to resist movement when buttons, pads and levers are operated with some force.
DJC-STS2 strengths
- Wide height adjustment range.
- Extensive angle adjustment.
- 6 kg load rating.
- Useful for effects units, laptops and other booth accessories.
- Folds for transport.
- Matches the visual design of current AlphaTheta booth equipment.
DJC-STS2 limitations
- 3.7 kg is relatively heavy for a stand.
- More expensive and specialised than a generic laptop stand.
- The 340 × 242 mm top plate will not suit every piece of equipment.
- Users still need to check clearance around mixer controls and cables.
AlphaTheta DJC-STS2 full specifications
- Folded dimensions: 340 × 349.3 × 101.6 mm.
- Set-up dimensions at lowest horizontal height: 340 × 263.5 × 260 mm.
- Top panel: 340 × 242 mm.
- Bottom panel: 260 × 240 mm.
- Flat top-panel heights: 235, 250, 265, 280, 295 and 310 mm.
- Angle range: 0° to 90°.
- Weight: 3.7 kg.
- Maximum load: 6.0 kg.
Frequently asked questions
Will the DJC-STS2 hold RMX-IGNITE?
Yes. RMX-IGNITE is one of the products AlphaTheta specifically designed the stand to support.
Can it hold a laptop?
Yes, provided the laptop fits securely on the platform and the total load remains within the 6 kg rating.
Does it fold flat?
It folds down to approximately 340 × 349.3 × 101.6 mm for transport and storage.
Overall view
The DJC-STS2 is a specialised but useful piece of booth furniture. Its main advantage over a basic laptop stand is the combination of substantial load capacity, multiple height positions and a very wide angle range. DJs building a permanent or frequently transported AlphaTheta setup are the most likely to value the extra stability and matching design.
Leave a Reply